TZ HYDROPROFILE RANGE
Description
Supporting profiles made of high-thickness hot-dip galvanised DX51 steel grade, according to the highest quality standards of Kingspan and in accordance with the applicable standards.
Supporting profiles made of high-thickness hot-dip galvanised DX51 steel grade, according to the highest quality standards of Kingspan and in accordance with the applicable standards.
Versatile range compatible with any system and type of gypsum board on the market, and with EI fire certificates, accredited through tests.
Applications
The TZ Hydroprofile range covers all common applications in gypsum board construction (partition walls, cladding, suspended ceilings, continuous ceilings, etc.) in high humidity areas, such as:
The TZ Hydroprofile range covers all common applications in gypsum board construction (partition walls, cladding, suspended ceilings, continuous ceilings, etc.) in high humidity areas, such as:
- Bathrooms, collective showers
- Kitchens, laundries
- Swimming pools and aquatic centers
- Air conditioning technical rooms
- Outdoor areas, façades, etc...
Available coatings
Choice of several available coating types, depending on the degree of environmental humidity: hot-dip galvanised Z275 (275g/m2), Z450 (450g/m2) or pre-lacquered polyester (25 μm / back 7) over Z100 or higher galvanised.
Choice of several available coating types, depending on the degree of environmental humidity: hot-dip galvanised Z275 (275g/m2), Z450 (450g/m2) or pre-lacquered polyester (25 μm / back 7) over Z100 or higher galvanised.
Applicable quality & standards
Norma UNE-EN 14195
Products certified with the N Quality assurance stamp of AENOR - check product Datasheets
Products certified with the NF Quality assurance stamp of C.S.T.B (France) - check product Datasheets
Documents
Download "Dossier TZ Hydroprofile range"
PRODUCTS