(+34) 947 483 700 


  • Clip18perfiles U
    High-quality TZ channel range, manufactured using cold-profiling using steel sheet with certified galvanisation.
    A wide, versatile range, with profile webs between 19 and 31 mm and between 5 to 30 mm flange heights.

    Perimeter profiles and finishes for continuous suspended false ceilings with single or double structures and gypsum plasterboard (PYL) partitioning.
    “U” profile range: Furniture and decoration of gypsum plasterboard plaques (PYL).
    CLIP 18 profile: Clip fastening system for partitioning and suspended ceilings with F45 or F47 channels.

    Applicable quality & standards
    CE AENOR NFUNE-EN 14195:2005 standard.
    RP53.12 AENOR standard.
    French NF411 standard.
    Product certified with the N quality assurance stamp of AENOR.
    Product certified with the NF quality assurance stamp of CSTB (France).

    • Standard CLIP 18 profile length: 3,000 mm.
    • Standard “U” profile lengths: 2,400 / 3,000 mm.
    • Steel grade: DX51D (according to UNE-EN 10346).
    • Coating: Galvanizado en caHot type Z140 galvanisation (140 g/m²). 
    • Reaction to fire: EUROCLASS A1 (non combustible).
    • Suspended ceiling fire resistance: Suspended ceiling fire resistance.
    • Partitioning fire resistance: Depending on the configuration, up to EI180 (180 minutes), accredited by laboratory testing.
    • Clip securing system: The CLIP 18 profile design allows its use with the F45 rail and F47 rail, thus simplifying the assembly and guaranteeing good securing between profiles.
    • Knurled or fluted surface in the case of “U” profiles to facilitate plaque screwing.

    • tz footerAPPLICATIONS

      Industrial building
      Commercial building
      Residential building
      Public centres and civil works
      Agricultural sector
      Industrial sector
      Solar energy sector
    • tz footerCONTACT

      Pol. Ind. Gamonal
      c/ Alcalde Martín Cobos, s/n
      E-09007 Burgos (España)
      T. (+34) 947 483 700
      F. (+34) 947 483 803
      M. This email address is being protected from spambots. You need JavaScript enabled to view it.